Model
|
CLM·32L
|
CLM-40M
|
CLM-40L
|
Chamber (usable inner size) Effective capacity
|
Ø320x676mm 54 liter
|
Ø400x672mm 85 liter
|
Ø400x832mm 105 liter
|
Usable max. temp./ pressure
|
138°C/ 0.26 MPa
|
135°C/ 0.24 MPa
|
Usable temperature
|
Sterilization :100~138°C
|
Sterilization :100~135°C
|
Dissolving :40-99 °C Warming :40-60°C
|
Usable time
|
Sterilization, Dissolving :0min. - 48hrs.00min. and continuous, Warming :0min. - 48hrs.00min.
|
Controller
|
Microprocessor controller, graphic display Temperature ···3digits. PID control
Timer···2digits hours: 2digits minutes, down count (Temperature/Time integration system)
|
Operation pattern
|
1 : Heating - Sterilization - Exhaust(adjustable)
2 : Heating - Sterilization - Exhaust(adjustable) - Warming
3 : Dissolving - Warming
|
Start timer
|
Able to set operation-start by calender···month, day, hour and minute.
|
Air exhaust device
|
Timed free steaming system, which means closing solenoid vaive by temperature sensing/time control (adjustable)
|
Exhaust cooling system
|
Water storage tank with cooling coil & Exhaust (drain receiver) bottle
|
Drain valve
|
Manual valve at inner side of exhaust bottle
|
Option
|
Auto. water supply
|
Automatic water supply system from city-water-faucet by level sensor
|
Pre-heat system
|
To shorten the come-up time, at 60°C. Provided only with auto. water supply.
|
Rapid cooling system
|
Chamber cooling system by one or two fan units
|
Safety
|
Safety devices
|
nterlock system, Electro mechanical lock system, Double check system of id close Over pressure detector, Over temperature detector, Water lack preventor Sensor break indicator, Abnormal time indicator, Memory of power failure
Safety valve, Breaker for slight leakage, over current & short circuit
|
Safety valve operation
|
0.29MPa
|
0.27MPa
|
Water test pressure
|
0.58MPa
|
0.54MPa
|
Material
|
Chamber & lid
|
Stainless steel SUS304, shiny polished. Molded silicon rubber lid gasket (self-seal system)
|
Outer panel
|
Steel with baked melamine finish. Top panel : Heat-resisting molded resin
|
Power demand (50/60Hz)
|
AC220 / 230 / 240V, single-phase, 50/60Hz
|
Power consumption
|
2.6kW, 12A
|
4.0kW, 18A
|
Power connector
|
Non, only wires are stripped from power cable
|
Outer dimensions WxDxH
|
550x550x990mm
|
620x650x 1000mm
|
620x650x 1160mm
|
Weight
|
71kg
|
87kg
|
90kg
|
Accessories
|
Stainless wire basket
|
Ø300X300mmx2pcs.
|
Ø380X300X2pcs.
|
Ø380X400X2pcs.
|
Others
|
Exhaust bottle (lt), Chamber drain tray
|
Optional accessories
|
Object temperature sensor, Printer, Basket with pan, Bucket, Dressing drum
|
Standards
|
ISO13485, ISO9001, Japanese MHLW Ordinance #169, JIS T 7324
|